PurePro 1 micron 10" Spun Polypropylen Sediment Water Filter Cartridge

The PurePro 1 micron 10"  filter is a 1 micron extra-fine sediment water filter cartridge made of spun bonded-polypropylene.

PurePro 1 micron 10" water filters reduce extra-fine dirt, sand, sediment, silt, rust particles, and scale particles.  Spun fibers form a true gradient density from outer to inner surfaces, filter will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Filters can be used on chlorinated or non-chlorinated water supplies.

Specs:

Dimensions: 9-7/8" x 2-3/8" (248 mm x 60 mm)Fits all 10" and 9-7/8" housing

Micron Rating (Nominal): 1 Micron

Temperature Rating: max 113°F 45°C

Initial P (psi) @ Flow Rate (gpm): 0.2 psi @ 5 gpm (

Reduces: Sediment / Particulate to 1 Micron  

PurePro 1 micron 10" is Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.

NOTE: Do not use with water that is micro biologically unsafe or of unknown quality without adequate disinfection before or after the system. 

PurePro 1 micron 10" water filter is the same as the Liff  10" 5 micron, Pentek P5 PS5 5 micron, AquaLogis 10" 5 micron, Kemflo, Ametek P5, Everpure DEV910908 / DEV9109-08 / 910908 / 9109-08, Bunn ED-S-1 / SS-10, Cornelius COR105 / COR120, Cuno CFS110, EcoLab 9320-1135, Manitowoc K-00069 / K-00173, NuCalgon 4712-87, PureMark PFS105, Selecto 101-230, Shurflo SF31-SEDS / F5-052-00